[China Glass Net] In the foundry machinery industry, the sanding machine is a sand processing equipment that is often used. Correct operation of the sander is not only the need of production, but also can extend the service life of the sander. Let's take a closer look at the operating rules of the sander and what are its advantages?
Glass sanding machine operating procedures
1. Check whether the vortex chamber observation door is closed before the sand machine is driven to prevent the material from rushing out of the vortex chamber and causing danger.
2. The direction of rotation of the impeller is seen from the direction of the inlet. The impeller should be rotated counterclockwise or the motor connection should be adjusted.
3. The starting sequence of the sanding machine and conveying equipment is:
Discharge → sanding machine → feeding
The sander must be started at no load, and can be fed after the vibrating crusher is operating normally.
The sander shutdown sequence is the reverse of the power-on sequence.
4. The granules are strictly in accordance with the specified materials. It is forbidden to enter the sand blasting machine larger than the specified materials. Otherwise, the imbalance of the impeller and the excessive wear of the impeller will be caused. The base will cause the impeller passage and the center feeding pipe to be blocked, so that the sanding machine can not be normal. Work, found that large feeds should be eliminated in time.
5. When the discharge equipment is stopped, the feeding should be stopped. Otherwise, the impeller of the sanding machine will be crushed and the motor will be burnt.
6. During the operation of the sanding machine, there must be no severe vibration or abnormal noise. Otherwise, it should be stopped for inspection.
7, mechanical lubrication, sanding machine every time you work, add the right amount of grease.
Advantages of glass sander
1, no dust, low noise. A new generation of no-Gude automatic glass sanding machine, in order to better meet environmental requirements, especially strengthen the machine's sealing and efficient dust removal design, adhere to achieve long-term effective dust-free production.
2. It is more stable and more durable. The self-wearing of the Gude automatic glass sanding machine is the main factor affecting the working life of the machine. The new generation of Goode automatic sanding machine is effective to strengthen the anti-wear material. Make the machine more wear-resistant, durable and stable.
3, more economical production costs. (higher efficiency) through effective technical improvements, the production of wear-resistant materials is greatly reduced.
4, the production of frosted glass is smaller, the quality is better. The whole machine supports the roller, both with power. Reduce the scratch of the glass caused by the glass drag in the production process.
5. The automatic sand sweep function is added, and the production efficiency is higher.
Double Jersey,Double Jersey Fabric,Double Sided Jersey,Double Jersey 90% Cotton Fabric
Shaoxing Huangdaopo Trade Co.,Ltd. , https://www.sxhdptrading.com